HT Straight Through Joints for PILC Cables
suitable for
PILC cables for upto 66kV.
Kit Contents:
1. In line Connectors (Ferrules)
2. Stress Control Mastic
3. Oil Barrier Sleeve
4. Conductive Tubing(Black)
5. Void Filler
6. Conductive Breakout
7. Grey Mastic
8. Stress Control Tubing (Black)
9. Insulating Tubing (Red)
10. H.S. Screened Dual Wall Tubing (Alternatively separate Insulation & Conducting Tubings)
2. Stress Control Mastic
3. Oil Barrier Sleeve
4. Conductive Tubing(Black)
5. Void Filler
6. Conductive Breakout
7. Grey Mastic
8. Stress Control Tubing (Black)
9. Insulating Tubing (Red)
10. H.S. Screened Dual Wall Tubing (Alternatively separate Insulation & Conducting Tubings)
11. Metallic Protection Cage (Alternatively GI Mesh Tape for mechanical protection A New Concept).
12. Adhesive Lined Side Sleeve
13. Insulating Wedge
14. Copper Mesh Tape
15. Earth Load
16. Constant Force Spring Clamp
17. Worm Drive Clamps
18. Outer Jacket Sleeve
19. Earthing Plumb
12. Adhesive Lined Side Sleeve
13. Insulating Wedge
14. Copper Mesh Tape
15. Earth Load
16. Constant Force Spring Clamp
17. Worm Drive Clamps
18. Outer Jacket Sleeve
19. Earthing Plumb
Electrical Performance:
Test |
Requirements |
Typical Value |
AC Dry Withstand voltage (1 Minute) |
50kV |
Pass |
DC Voltage Withstand test (30 Minute) |
96kV |
Pass |
Lightening Impulse Withstand Voltage |
125 kV |
95 V |
Note:All kits are supplied with full kit content for making a straight through joint.
Selection Table:
FOR 12 kV (UE)/ 24 kV (E) H.T. XLPE CABLES |
|
FOR 3-CORE STRAIGHT END TERMINATIONS |
|
Cable Size mm2 |
Product Code |
25-50 |
ASPJ-3521 |
70-95 |
ASPJ-3522 |
120-150 |
ASPJ-3523 |
185-240 |
ASPJ-3524 |
300-400 |
ASPJ-3525 |
FOR 36 kV (E) H.T. XLPE CABLES |
|
FOR 3-CORE STRAIGHT END TERMINATIONS |
|
Cable Size mm2 |
Product Code |
35-70 |
ASPJ-3531 |
95-150 |
ASPJ-3532 |
185-300 |
ASPJ-3533 |
400 |
ASPJ-3534 |
* We reserve the right to make any technical changes or modify in content.